Water damage restoration is required whenever a water hazard occurs at your house. It does the inspection of the damage occurred and does most of the repair of the damage.
When a water related accident occurs at your house like bursting of a water pipe or any leakage occurs in water heaters or other water supply areas it becomes to repair such a damage. The water damage restoration is process which has five basic steps and it begins with the inspection of the accident that how did it occur and then it ends up by restoring the damage and make the whole water setup undamaged and makes it functional just like a new one. Each step of water damage restoration is essential and missing any step would lead to an unfinished repair which might lead to starting the whole process again. It is very crucial that the area where the water is leaking is found out and be repaired.
The steps of water damage restoration are explained as follows:
STEP 1: Inspection and Analysis
This one is the most important step. All of the water damage restoration companies go through this step to do the analysis of the damage which lead to the water leakage. In this step the experts would classify the damage occurred which will eventually make the repairing process easier leading to the restoration of water system. Firstly they find out the adsorption efficacy of the materials which have been affected by the water leakage in order to find out the amount of water absorbed by those materials with time passed. They have such specialized equipment which determine the moisture content and help to determine the amount of damage caused. They rate the damage from scale 1 to 4 depending on their findings. The water leakage source will be classified as Category 1 to 3 and accordingly they will charge you for repairing the damage.
STEP 2: Draining the Water
An extractor is used to drain the leaked water. As long as the water is present in your property it will destroy your belongings and will lower their quality. So it is important to dispose off that leaked water. This step becomes more crucial if the area affected is a basement which can even cause the formation of mold. Water extractors are utilized by the companies to remove the water. These extractors act as a vacuum or a pump which help in removing water and then disposing it of in a space where it can drain. Following methods can be used to remove water:
- Portable wet vacuum
- The submersible pumps
- The tract mounted vacuums
STEP 3: Drying and De-humidifying
Once all the water has been removed then the water damage restoration company will start out the drying process. For this purpose a dehumidifier of commercial grade is utilized. After removal of water the space or materials affected by water may look dry but they actually have water and moisture in them which is absorbed into those materials. So dehumidifiers help to remove that absorbed moisture. While the machines do their work the experts continuously check the humidity levels and make sure that all of the things become moisture free.
STEP 4: Sanitizing and Cleaning
The water restoration companies complete their work in a very professional way. They clean the whole area so that all of the materials affected could be saved. The cleaning process should be conducted by a professional person. All the affected area should be thoroughly cleaned and sanitized. Cleaning can be done in a lot of ways such as dry cleaning, wet cleaning and spray cleaning. In the cleaning process materials such as foam and abrasives are used. In case there is a mold a remedy to remove it would be started.
STEP 5: Repairing affected Areas
This is the final step of water damage restoration. In this step all the necessary steps are carried out to do all the repairs that caused the water leakage. In this process all repairing is done and the whole water supply is brought back to the unaffected state. This can be simple or complex depending upon the area which is affected by water damage.
Costs of the Water Damage Restoration process
The water damage restoration companies charge for their services according to the damage that was required to be repaired. The normal charges for water restoration companies range from $2000 to $5000. However the average costs charged by water restoration companies are usually $3000 in the United States which mostly includes extracting grey water which occurs as a result of a flooded toilet, this may also include the repairing of ceilings and walls.
Companies that provide Water Damage Restoration services
The following are some of the top rated companies that provide best water restoration services:
ServiceMaster Restore
This is one of the famous companies in the US which provide water damage restoration services to commercial and as well as residential areas. They provide many services such as water extraction and cleaning, drying and dehumidifying. They deal with water damage occurring from leakage of pipe, leakage on the roof. They also provide services for flooded basements and grey water damage. After performing these steps their experts make sure that all of the process is carried out in success and the customer is fully satisfied with their job.[i]
Amerestore
This company was found in late 80s they provide services in the states of Florida and Gulf and eastern coast. They are mostly suitable for providing water damage restoration services in residential areas. In addition to water damage restoration they provide many other cleaning services as well. Their service is available 24/7 so they are more advantageous in providing the services they can arrive at your place whenever you are in need. The experts of amerestore are very qualified and are certified from IICRD and follow their guidelines to ensure safety. They work with many of the insurance companies so their charges can be directly paid by your insurance company. The repairs just need to be approved by the insurance company.[ii]
[i] https://www.servicemasterrestore.com/residential/water-damage/
[ii] https://www.amerestore.com/
